?

Log in

No account? Create an account
Previous Entry Share Next Entry
Teaching an Embedded Web Server Class
pokemon
unwiredben

BTW, if you're up here in New York and want to learn about making embedded devices that act like web servers, I'm teaching a two hour class on the subject on March 28th at NYC Resistor. After the class, I'll be putting my materials online, but I'm still working on everything right now.

You can get details on the class at http://www.eventbrite.com/event/302042417.

  • 1

does it work without ethernet shield?

(Anonymous)
Does webduino works with WIZ811MJ along on the PCB without the Ethernet Shield? Or, does it work with adafruit eithernet shield? Try to save a few bucks... Thank you.

Re: does it work without ethernet shield?

You can use the ladyada shield with the Wiznet module; in that configuration, it's electrically the same as the Arduino Ethernet shield. However, using the module does increase the vertical height of the board, which means you can't stack another shield on top.

NKCElectronics has a cheaper compatible shield kit for $30 -- check out http://www.nkcelectronics.com/nkc-ethernet-shield-for-arduino-mega--duemilanove--diecimila-diy-kit.html . It's $32, but you do have to solder it up yourself.

Re: does it work without ethernet shield?

I'm not sure how you'd interface to the WIZ811MJ without a shield of some sort. If you built your own Arduino-compatible board, you could include the Ethernet shield directly on it, and as long as it was the same signals as the official shield, it should work.

  • 1